Structural Analogy Method in Studies of Adamantanes

The potential of the structural analogy method in the topological studies of adamantane derivatives and analogs is demonstrated. The topological and structural characteristics of these compounds are calculated. Chromatographic retention indices were determined experimentally. Correlations between the topological indices and the physicochemical and chromatographic characteristics are investigated.     

Melt-polymerizable bisimido-bisphthalonitriles containing silicon,fluoro, and ether groups: Synthesis,characterization, and NMR study

Various melt-polymerizable bisimido-bisphthalonitrile polymer precursors were synthesized by the reaction of 4-aminophthalonitrile (4-APN) with bis(3,4-dicarboxyphenyl) dimethylsilane dianhydride (SIDA), 4,4′-hexafluoroisopropylidene diphthalic anhydride (6FDA), bis(3,4-dicarboxyphenyl)ether dianhydride (ODPA), and 3,3′, 4,4′-tetracarboxylichenzophen+ne dianhydride (BTDA) in an aprotic solvent. The synthesized monomers showed crystalline melting at 269 and 271°C. Elemental analysis, differential thermal analysis (DTA), infrared (IR), nuclear magnetic resonance (¹H-NMR) and mass spectral studies were carried out to characterize the synthesized monomers. Thermogravimetric analysis (TGA) of the synthesized monomers showed their thermal stability at 410–400°C. A detailed study and NMR investigation of the first step of condensation reaction was carried out and indicated the formation of a transient charge transfer complex. Thermal cyclization of the formed intermediate, however, gave the required monomers. A preliminary study demonstrated that melt-polymerization of the synthesized monomers gave thermallystable, tough polymers.     

Equations for calculation of the pH of buffer solutions containing sodium or potassium dihydrogen phosphate, sodium hydrogen phosphate, and sodium chloride at 25°C

Published thermodynamic data measured in aqueous mixtures of sodium or potassium dihydrogen phosphate with hydrogen phosphate and chloride at 25°C were used to test recently developed methods for calculation of the pH of phosphate buffer solutions. Equations for ionic activity coefficients are used in these methods. It is shown that all data used in the tests up to an ionic strength of about 0.5 mol-kg^-1 can be accurately predicted by the two methods recommended. In one of these methods, equations of the Hückel type are used for ionic activity coefficients and in the other equations of the Pitzer type. Several sets of phosphate buffer solutions are recommended,e.g., for calibrations of glass electrode cells. In the recommended sets, the pH of the buffer solutions can be calculated either by the Hückel or Pitzer method, and the pH predictions of these methods agree in most cases within 0.005 at least up to ionic strengths of about 0.2 mol-kg^-1. The pH values of the two primary pH standards endorsed by IUPAC based on aqueous mixtures of KH₂PO₄ and Na₂HPO₄,i.e., pH values of 6.865 and 7.413, can also be accurately predicted by the equations recommended in this study.     

1, 5-Rearrangement of enol acylates of aryl 1H.-1, 2, 4-triazol-1-ylmethyl ketones

The rearrangement of enol acylates of aryl 1H-1, 2, 4-triazol-1-ylmethyl ketones at 140–150°C in acetic anhydride is studied. The migration of the acyl group to the C(5) atom of the heterocycle is found to be intramolecular. The characteristics of the original and final products are presented. X-ray structural studies of the enol acetates of 2, 4-dichlorophenyl 1H-1, 2, 4-triazol-1-ylmethyl ketone and 2, 4-dichlorophenyl 5-acetyl-1H-1, 2, 4-triazol-1-ylmethyl ketone are carried out.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 560–564, March, 1993.     

Qualitative estimation of the dependence of the number of energetic compounds on their oxygen coefficient

The ratio between the numbers of structural formulas of C,H,N,O-containing energetic compounds belonging to the classes of fuels (low values of the oxygen coefficientA), explosives (mediumA), and oxidants (highA values) was studied by a computer generation procedure. The number of the theoretically possible structural formulas was found to decrease rapidly on going from fuels to explosives and then to oxidants; this observation agrees with the data on the numbers of various energetic compounds currently used and proposed. The strategy of the search for new compounds with the specified properties is described in brief, and its applicability to the search for explosives and oxidants with a small (up to 12) number of atoms in a molecule is evaluated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1304–1310, July, 1998.     

Effect of Oxygen Redistribution on the Normal and Superconducting Properties of Yttrium High‐Temperature Superconductors

An anomaly is found in the vicinity of T_max 560$ K on electric resistance versus temperature curves for yttrium hightemperature superconductors of the 123 phase. Xray phase analysis suggests a structural phase transition in the vicinity of T_max due to oxygen redistribution in the mobile sublattice of this compound. Investigation of samples with Y partially replaced by Ca has shown that the structural phase transition does not depend on carrier concentration in the conduction band.     

Adsorption Behavior of a Water-soluble Porphyrin at the Glass-water Interface as Studied by Synchronous Total Internal Reflection Fluorescence Spectroscopy

Total imernal reflection fluorescence spectroscopy (TIRF) and synchronous scanning technique were combined to study the adsorption behavior of the meso-tetrakis (4-sulfonatophenyl)porphyrin (TPPS) at the glass-water interface without any surfactant. The pH dependence of synchronous fluorescence signal at the interface was analyzed. Both unprotonated (TPPS^4-) and diprotonated (H2TPPS^2-) forms of TPPS were observed at the interface. But the interface favored the adsorption of. The apparent estimated pKa2 value shifted from 5.00 in the bulk solution to 2.7 at the interface. STIRF provides a good technique to study multi-component systems at the interface.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

S1←S0 Vibronic spectra and the structure of acetyl fluoride-h3 and acetyl fluoride-d3 molecules

UV absorption spectra of acetyl fluoride-h₃ and -d₃ (CH₃COF and CD₃COF) molecules in the region of S₁S₀ electronic transitions are investigated. The origins (0⁰ ₀ or 14^0± ₀) of these transitions are observed at 39912 and 39904 cm^–1, respectively, and some of the fundamental frequencies of these molecules in the s₀ and S₁ states are determined. In particular, the systems of torsion and inversion (out-of-plane C=O vibrations) energy levels are studied. The geometric parameters of an acetyl fluoride-h₃ molecule in the S₁ state are estimated by the theoretical simulation of the rotational contours of the 0⁰ ₀ (14^0± ₀) band. These data are used to evaluate the potential barriers to internal rotation in the S₀ and S₁ states, which were found to be 360 and 560 cm^–1 for acetyl fluoride-h₃ and 380 and 770 cm^–1 for acetyl fluoride-d₃, respectively, as well as the potential barriers to inversion in the S₁ states, which were found to be 2090 and 2370 cm^–1 for acetyl fluoride-h₃ and acetyl fluoride-d₃, respectively.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1957–1964, November, 1994.In conclusion, the authors would like to acknowledge T. S. Kuznetsova for the synthesis and purification of the AF samples.The research presented here was supported in part by the International Science Foundation under grant No. MJ 1000.     

Molecular structure of potassium [N,N′-bis(salicylideneamino)nitroguanidonate-N,N′,-O,O′]nickel(ii), the product of condensation of (salicylideneamino)nitroguanidine with salicylaldehyde on a Ni2+ ion template

The crystal structure of the product of the condensation of (salicylideneamino)nitroguanidine with salicylaldehyde on a Ni²⁺ ion template, K[Ni(C₁₅H₁₀N₅O₄)] · DMF, has been studied. It was established that a planar Ni complex, consisting of isolated [NiL]^– anions and solvated [K⁺ · DMF] cations, is formed. The negative charge of the anion is localized mainly on the O atoms of the nitro group. The nitroguanidine fragment of the ligand occurs in the tautomeric form, which was not reported previously.Deceased in 1995Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2273–2277, September, 1996.